The RPC Remote Power Control is a power distribution unit that combines power control and power/environmental monitoring into one convenient power management solution. Along with other members of our new 3-Phase product line, the RPC affords substantially more power capacity than single phase. By addressing the needs to monitor power and temperature created by additional equipment in Data Centers and IT infrastructures, the RPC unit provides you with the ability to increase the life expectancy of your equipment and ultimately your return on investments within these conditions.
The RPC's rich feature set can be combined with the SNMP controller the DS Series. An RS-232 interface between the controller and the RPC allows for full SNMP monitoring and control for a maximum of 32 RPC's with only one Ethernet connection. The modular design of a DS Series maximum flexibility when determining the size of your installation. Combined with Global Power Management software the DS-Series SNMP controllers provide an enterprise level solution for controlling power, as well as monitoring power and physical environmental. - Manage Power to the Receptacle Level (On, Off, Reboot)
- Reboot unresponsive equipment
- Turn off unused receptacles
- Log and maintain receptacle connectivity
- Monitor and control power using existing NMS software or BayTech's GPM software
- Standard power distribution for single/dual corded applications - Monitor Power to Circuit Level with True RMS: Current, Voltage, Watts, VA
- Receive alarms based on preset thresholds
- Audit circuit prior to plugging in more equipment
- Plan cooling requirements by using watt readings
- Audible and LED alarm warnings - Monitor Internal Temperature
- Receive alarms based on preset thresholds
- Eliminate equipment failure due to excessive heat - Well-Suited for Low-Density Applications
- 8 controllable receptacles
- Single-cord power input
- Rack-mount unit
| 
BayTech RPC 3 SeriesBayTech's RPC3 offers flexible power management, including individual receptacle control - on, off, reboot and circuit-level power metering.
The RPC3's command interface consists of an Ethernet port and an RS-232 port. The Ethernet port provides SNMP, SSH and Telnet connectivity. The RS-232 can be connected to a local terminal, BayTech's DS Series controllers or any RS-232 terminal server.
When combined with BayTech's Global Power Management (GPM) software, the RPC3 becomes part of a remote power management strategy, which includes the ability to control single- or dual-corded devices as well as monitor power to avoid tripping breakers and manage real-time load density.
Like all of BayTech's power management products, the RPC3 delivers reliable PCB-based power distribution. Because the receptacles are built on circuit boards, they should never fail due to faulty wiring or cold solder joints. | | RPC3ADE-10 | 230 VAC, 10 Amp, 8 IEC320-C13R receptacles, RS232 & Ethernet access, Terminal, Telnet & SNMP control, 1U rack mount form factor | | RPC3ADE-16 | 230 VAC, 16 Amp, 8 IEC320-C13R receptacles, RS232 & Ethernet access, Terminal, Telnet & SNMP control, 1U rack mount form factor | | RPC3ADE-20 | 230 VAC, 20 Amp, 8 IEC320-C13R receptacles, RS232 & Ethernet access, Terminal, Telnet & SNMP control, 1U rack mount form factor | | RPC3ADE-30 | 230 VAC, 30 Amp, 8 IEC320-C13R receptacles, RS232 & Ethernet access, Terminal, Telnet & SNMP control, 1U rack mount form factor | | RPC3DE-15 | 120 VAC, 15 Amp, 8 NEMA 5-20R receptacles, RS232 & Ethernet access, Terminal, Telnet & SNMP control, 1U rack mount form factor | | RPC3DE-20 | 120 VAC, 20 Amp, 8 NEMA 5-20R receptacles, RS232 & Ethernet access, Terminal,Telnet & SNMP control, 1U rack mount form factor | | RPC3DE-30 | 120 VAC, 30 Amp, 8 NEMA 5-20R receptacles, RS232 & Ethernet access, Terminal, Telnet & SNMP control, 1U rack mount form factor |
| | BayTech Zero U Solutions BayTech's zero U RPC units let you conserve precious rack space while maintaining complete control. | 
BayTech RPC Zero U Power Strips | | RPC22 | Twelve receptacle vertical mount remote power control and monitoring with RS-232 access | | RPC26 | Twenty receptacle vertical mount remote power control and monitoring with RS-232 access | | RPC28 | Twenty-one (20 controllable + 1 always-on) receptacle vertical mount remote power control and monitoring with RS232 access | | RPC29 | Twenty-four controllable receptacle vertical mount remote power control and monitoring with RS232 access | | RPC51 | Eighteen receptacle 3-Phase vertical mount Remote Power Control and metering with RS232 access | | RPC52 | Twenty-one receptacle 3-Phase vertical mount Remote Power Control, metering and environmental monitoring with RS232 access | | RPC53 | Nineteen receptacle 3-Phase vertical mount Remote Power Control, metering and environmental monitoring with RS232 access | | RPC56 | Twenty-four receptacle 3-Phase vertical mount Remote Power Control and metering with RS232 access | | RPC58 | Twenty-four receptacle 3-Phase vertical mount Remote Power Control and metering with RS232 access | | RPC59 | Twenty-four receptacle 3-Phase vertical mount Remote Power Control and metering with RS232 access | | RPC61 | Thirty-six receptacle 3-Phase vertical mount Remote Power Control and metering with RS232 access | | RPC63 | Thirty receptacle 3-Phase vertical mount Remote Power Control and metering with RS232 access |
| | BayTech's Network Solutions Make the connection with our network-enabled modules. These RPC units are equipped with Ethernet ports so you can extend your reach through a local console or telnet. |
BayTech RPC with Ethernet Ports | | RPC3 | Eight receptacle rack mount remote power control and monitoring with Ethernet and RS-232 access | | RPC5 | Four-in four-out high current rack mount remote power control and monitoring with Ethernet and RS-232 access | | RPC9 | Twenty receptacle rack mount remote power control and monitoring with Ethernet and RS-232 access | | RPC11 | Eighteen receptacle rack mount remote power control and monitoring with Ethernet and RS-232 access | | RPC15 | Eight receptacle rack mount remote power control and monitoring with Ethernet and RS-232 access | | RPC17 | Eight receptacle dual input rack mount remote power control, monitoring, and transfer switch with Ethernet and RS-232 access | | RPC35 | Twenty terminal -48VDC rack mount remote power control and monitoring with Ethernet and RS232 access | | RPC41 | Sixteen receptacle dual input rack mount remote power control and monitoring with Ethernet and RS232 access |
| | BayTech RS232 Enabled RPCs Economical power control solution. Multiple RS232-enabled RPCs can be controlled through a single IP address using a DS module- | 
BayTech RS232 Enabled RPCs | | RPC4 | Eight receptacle rack mount remote power control and monitoring with RS-232 access | | RPC6 | Four-in four-out high current rack mount remote power control and monitoring with RS-232 access | | RPC10 | Twenty receptacle rack mount remote power control and monitoring with RS-232 access | | RPC12 | Eighteen receptacle rack mount remote power control and monitoring with RS-232 access | | RPC14 | Eight receptacle rack mount remote power control and monitoring with RS-232 access | | RPC16 | Eight-receptacle dual-input rack mount remote power control and monitoring with RS-232 access | | RPC18 | Eight receptacle dual input rack mount remote power control, monitoring, and transfer switch with RS-232 access | | RPC36 | Twenty terminal -48VDC rack mount remote power control and monitoring with RS-232 access | | RPC42 | Sixteen receptacle dual input rack mount remote power control and monitoring with RS-232 access | | RPC44 | Twenty-four receptacle 3-Phase rack mount remote power control with transfer switch and monitoring with RS-232 access |
|
Is the BayTech MRP the best Rack PDU for your power needs?
Our engineers can help you select the best Rack PDU solution for your power needs.
Click here or Call 1-800-638-2638 for a free data center power project evaluation. | 
BayTech RPC
Remote Power Control
The BayTech RPC and RPC 3 offers many benefits: Bring remote sites and data centers under your control. BayTech's RPC series of power management solutions can give your administrators the ability to: - Manage Power to the Receptacle Level (On, Off, Reboot)
- Reboot unresponsive equipment
- Turn off unused receptacles
- Log and maintain receptacle connectivity
- Monitor and control power using existing NMS software or BayTech's GPM software
- Standard power distribution for single/dual corded applications
- Monitor Power to Circuit Level with True RMS: Current, Voltage, Watts, VA
- Receive alarms based on preset thresholds
- Audit circuit prior to plugging in more equipment
- Plan cooling requirements by using watt readings
- Audible and LED alarm warnings
- Monitor Internal Temperature
- Receive alarms based on preset thresholds
- Eliminate equipment failure due to excessive heat
|
