KEEMUX-P8 KVM PC Switch (Front & Back)
NTI PS/2 KVM Switch| | 
| Buy Online |
| |
CONTROL MULTIPLE PCS WITH ONE KEYBOARD, MONITOR & MOUSE | Features & Applications | These electronic KVM switches allow one keyboard, monitor and mouse to control up to 128 computers. Dedicated internal microprocessors emulate keyboard and mouse presence to each attached PC 100% of the time so all computers boot error free.- Control all network computers from one office.
- Improve manageability of your computer room - eliminate extra cables, monitors, keyboards and mice.
- Compatible with all PS/2-style PCs and laptops, HP9000, Silicon Graphics and IBM RS6000 workstations.
- Compatible with IntelliMouse.
- Auto scan all computers to catch system failures early.
- Broadcast keystrokes to all computers for simultaneous shut-downs.
- Cascade smaller KVM switches together as your network grows-up to 128 ports.
|
| Compatibility | Control Methods | Keyboard - All connectors are female.
- Connector is 6 pin miniDIN.
- Keyboard and mouse presence are emulated 100% of the time so all computers boot error-free.
- Keyboard and mouse are hot-pluggable.
- PC switch Will hard or soft boot all PCs 100% of the time.
- SCROLL-, CAPS- & NUM- LOCK lights update upon switching.
Mouse - All connectors are female.
- Connector is 6 pin miniDIN.
- Compatible with all standard 2-button PS/2 mice as well as the following:
- Alps Glidepoint Touchpad-extended functions (i.e. tapping, etc.) are not supported.
- Cirque Glidepoint Touchpad.
- IBM Scroll Point mouse-extended stick functions are not supported.
- Kensington Orbit Trackball.
- Logitech (and other) 3-button mice.
- Logitech 2-button Wheel Mouse.
- Microsoft Ballpoint mouse.
- Microsoft IntelliMouse.
Monitor-VGA - Bandwidth is 150MHz.
- Supports 1900x1200 resolution with no degradation.
- All connectors are female 15 pin high density VGA.
Power - Two-port switches draw power from attached computers.
- 110 or 220 VAC at 50 or 60Hz for all switches with more than two ports.
| Buttons on Front - Touch a button and be connected to a CPU or change modes of operation.
- LEDs indicate currently selected port and mode of operation.
- Hold in any button for more than two seconds to go into Scan Mode, Broadcast Mode or Command Mode.
- Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch.
- Scan Mode feature causes the switch to automatically and sequentially display the video from each powered on computer for 2-255 seconds.
- Broadcast Mode feature allows the user's keystrokes to be sent to all powered on computers.
- Command Mode allows the user to give instructions to the switch through their keyboard. Keystrokes are not passed to the computer.
Keyboard - Type CONTROL + ` to go into Command Mode. ("`" is the accent mark located on the same key as the tilde "~")
- Press ESCAPE to leave Command Mode and return to Normal Mode
- Scan Mode, Broadcast Mode or Command Modes are available from the keyboard
| 
On Screen Display Option | Optional-sold separately - RS232 Control
- On Screen Display (OSD)
- Rackmount Option
- Dual Video Option
Available on 2 & 4 port models
- Audio Option
- Keyboard Adapters Option
Optional Adapters | 
|
| AVAILABLE SIZES & INTERFACE CABLES | | NTI Part # | # of Ports | Keyboard & Mouse Cable | Monitor Cable | Size (In.) WxDxH | Rack Size | | Rack Units | WxDxH(In.) | KEEMUX-P2 | 2 | VVKINT-xx-MM (one cable for keyboard & mouse) xx=desired
length in
feet | VEXT-xx-MM (High Resolution through 1900 x 1200) xx=desired
length in
feet | 8x6.2x2.6 | 1RU | 19x10x1.75 | KEEMUX-P4 | 4 | 10x7.5x3.3 | 1RU | 19x12x1.75 | KEEMUX-P8 | 8 | 10x7.5x3.3 | 1RU | 19x12x1.75 | KEEMUX-P12 | 12 | 11.5x7.8x6.1 | 3RU | 19x10x5.25 | KEEMUX-P16 | 16 | 11.5x7.8x6.1 | 3RU | 19x10x5.25 | KEEMUX-P24 | 24 | N/A | 3RU | 19x10x5.25 | KEEMUX-P32 | 32 | N/A | 5RU | 19x10x8.75 |
|
